• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Choosing uPVC Replacement Window Handles

Almost all customers agree that these upvc replacement handles for upvc windows window handles are easy to fit and feel as good quality. However, it is important to realize that the kind of handle you choose must be right for your window.

The key factor is the step height, which refers to the space between the handle's nose to the frame or base. Other factors to consider are lockable mechanisms and styles.

Replacement parts

There is a variety of replacement upvc window handles available to buy. They are available in a variety of styles and colors, so there's bound to be something to suit your windows. It's easy for you to buy something on impulse especially when the handle is damaged. It is therefore advisable to check a few things before purchasing the replacement. First, you must be aware of the kind of upvc handles you have and what the differences are between them. The table below lists the most common handles to help you select the best one to match your window.

Espag handles are the most common and are found on most modern double-glazed windows. They are typically attached to the frame using two screws that screw into the frame from both sides, above and below.

They have a spindle bar at the back that can be of a variety sizes, and this will determine the way they operate (either left or right handed). This is why it's essential to take a measurement of the handle you have in order to make sure that you're ordering the correct replacement.

Typically fixed by two bolts similar to the Espag handle, they are positioned low from the frame, which means that the arm will not poke through your blinds. This is a great option if you have blinds for your windows made of Upvc and you want to make sure the handle blends with the blinds.

Cockspur handles are similar to Espag handles, however they have a nose that closes over a wedge that rests on the frame of the window. This type handle is found on some older wooden and Upvc windows.

Tilt and turn handles are often found on casement windows and can be operated by turning the handle or pushing on the top of the window. This opens the window from the inside and lets you to clean outside without having to go out onto a ladder or walk over the garden fence. They are ideal for those with mobility issues, and can enhance security and access to the home.

Tips and hints

A lot of people will need to replace their uPVC window handles at some point. When this happens, it's a good idea to know a few tips and tips that can help the job be as smooth as it can.

Examine the type of handle that is in your home. Based on the type of handle and the locking mechanism, it could be necessary to replace window handles the handle and lock. For example, if the shoot bolts (espag) and roller cams are seizing or jammed, you will need to change them as well as the handle itself.

Thankfully, the majority of uPVC handles conform to industry standards and are very similar. This makes replacing them an simple task. First, you must remove the screw covers on the handles. These are usually pozidrive screws. Once the screw covers are removed, you will be able to dismantle the handle.

If you've got the handle broken, it's a good idea to make note of how much of the spindle protrudes from the base of the handle. This will allow you to measure the spindle length for the replacement handle. Simply measure the amount that the peg is sticking from the bottom of the handle.

This is particularly crucial for inline uPVC window handles because they will always be straight and will only open either left or right, and will not operate in the middle. If you're not sure of the kind of handle you have in your home, it might be a good idea to take the handle from your neighbor's home and see how it functions to get an idea.

You can also determine the hands of a uPVC window by observing the way the handle turns when it is used. Handles that are hand-operated will turn clockwise or Upvc replacement window handles counter-clockwise. If you're not sure it's possible to have someone else open the window using the handle and figure out how it operates in this way.

Measure the spindle

The selection of the right replacement handle for your windows can be difficult as there aren't all handles that are the same size. The spindle is the part that controls the locking mechanism inside the window and it is crucial to ensure that when installing a new handle it is measured to the length of the spindle precisely to ensure it fits. There are a variety of uPVC handles that operate in various ways. It is crucial to identify the type you have, and what locking mechanism you are using.

The spindle of the Espag handle is a part that extends from the rear of the handle and goes into the lock gearbox inside the window frame. When you turn the handle, this then turns the lock in the gearbox and opens the window. They are used on uPVC windows with casement and can be locked using keys to provide additional security.

Cockspur handles are commonly found in older double-glazed uPVC window frames. They are characterized by an "nose", which closes over a wedge shaped striker block. They are also easy to use and can be locked with keys. It can be more difficult to replace these handles as they are not as popular as the handles with espagnolette.

If you have a tilt and turn uPVC, you will require a replacement handle with a different locking mechanism. It will be able to open the window, but also turn it around to open it fully. It is essential to ensure that the handle you select has a spindle length at least 55mm, or it will not be able to reach into the window frame.

You can follow the same procedure to remove and replace this kind of uPVC handle, however you must be cautious when removing the old one. It might be necessary to open the window more than usual to reach both screws that attach it to the frame. After you have installed your new uPVC handle and checked that it is in the right position, then you can tighten the screw covers and test the lock to make sure it works properly.

Install the new handle

Once you have the right replacement handle, it should simply screw into place. This will require a screwdriver and might be easier using an electric one. When screwing in place it is important not to over tighten the screws as this could cause the handle to crack or warp.

Inserting the spindle is the second crucial step to install the new handle. It is the part that is inserted into the handle and controls the locking mechanism within the window. It is vital that it is fitted correctly, as this will ensure the window is able to be opened and closed securely.

There are many different kinds of uPVC window handles. There are various kinds of uPVC window handles.

Espagnolette Handles - these are inline handles that can be used on tilt and turn windows to open the window.

Cranked Espagnolette Handles - these are similar to the inline handle but feature a curved design that is ideal for windows that are difficult to reach.

Tilt and turn handles - These are used to operate the opening mechanisms and closing mechanisms on tilt and turn. They also move windows.

The majority of uPVC window frames come with these. They are often referred to as 'Bay Windows' in the UK.

It can be frustrating If your uPVC handle fails. There is no need to change the entire uPVC window because of a broken window handle. There are a few simple steps you can take to repair or replace a broken uPVC handle.

By identifying the type of window you have, calculating the spindle length and purchasing a replacement handle you can easily fix your broken window handle. When working with windows or tools it is essential to consider safety first. But it is a simple task. It could be the difference between having a secure and secure home, or a window that can be easily opened. If you have any concerns or want to talk to a specialist about replacing your window handle, contact Bridgewater Glass. Our team is experienced and knowledgeable to assist you with any problem.